- Listado: 6 diciembre, 2018 12:12 am
- Caduca: 85 dias, 19 horas
Product Name: Epoxy Coating for Steel Pipe
The epoxy anti-corrosion coating is a very important additional processing of steel pipe. The anti-corrosion coating’s quality directly decides the life of pipe system. The selection of anticorrosive paint and setting the machining process parameters have a great influence on the quality of products.
Standard: AWWA C210-2007
Steel Grade: Q235B, Q345B, Q345C, GR.B, X42-X80, S235JR, S235JO, S335JR, S355J2. ect.
Size Range: 60.3mm-2540mm for external coating, 219.1mm-2540mm for internal coating. Thinkness: 5mm-30mm
In order to ensure the quality of epoxy coating, KRM improved the epoxy coating processing from the here below points:
1.The selection of anticorrosive paint: KRM only select high quality epoxy coating brands, such as Akzo Nobel, 3M™ Scotchkote™ and so on.
2.All the steel pipe coating standards are based on the maximum service temperture of the potable water.
3.All the paint materials are meet the provision of the standard which the customers demanded. Materials or work that fail to comply may be rejected by ourselves.
4.The pipe suffaces will be abrasive blast cleaned to achieve a near-white metal surface. Abrasive blast cleaning and coating will only be performed when the metal temperature is more than 5°F（2.8°C）above dew point.
5.If abrasives or other loose foreign matter has entered the interior of the pipe, then clean, dry,oil-free compressed air will be used to remove the loose foreign manner that does adversely affect the cleaned surface. Alternatively, vacuum cleaning or other methods may be used in place of compressed air.
6.Protection from moisture. Abrasive blast-cleaned pipe surfaces will be protected from conditions of high humidity, rainfall, or surface moisture. Pipe shall not be allowed to flash rust before coating.Liquid Epoxy Coating Pipe